Premium Plus Pack ABEK1P3 with SR 100 Half Mask Silicone

Sku 710355
59.00€
(vat included 24%)
Premium Plus Pack ABEK1P3 with SR 100 Half Mask Silicone  M/L with particle filter SR 510 P3 R & gas filter SR 297 ABEK1 at special price.H05-0003 M/L  ...
AVAILABILITY Immediate collection/Delivery in 1-3 days
Add to wishlist Wishlist Add to Compare Compare

INFO

Premium Plus Pack ABEK1P3 with SR 100 Half Mask Silicone  M/L with particle filter SR 510 P3 R & gas filter SR 297 ABEK1 at special price.
  • H05-0003 M/L  Contents: Half mask SR 100 M/L, particle filter SR 510 P3 R,gas filter SR 297 ABEK1, pre-filter,pre-filterholder, cleaning wipe.
  •  Recommended application Area: Industry, Marine
All packed in a practical storage box. Sundstrom Premium Plus Pack is suitable for use in dusty environments, for example with: Agriculture, Municipal sewage and treatment plants, Waste and refuse plants, Operations with many different contaminants, where you want to be sure not to choose the wrong fiterSR 100 Silicone Half Face Mask of Sundstrom Half mask with excellent fit, high protection level and very good breathing comfort for use in the toughest work environments.
  • SR 100 made of Silicone size M\L
  • 2 Exhalation valves, which ensures very low exhalation resistance
  • The material and the pigment of the mask body are approved by FDA and BGA for foods, which minimizes the risk of contact allergies
  • Easily adjustable elastic head harness straps of the mask are designed as a V-shaped loop and have a large dished crown plate, which contributes towards a comfortable and safe fit
  • Supplied with pre filter holder allowing you to check face seal before and during work
  • Same filter system for all negative pressure half- and full face masks
  • Range of accessories and service kits available, The mask is used either as a filtering device in combination with filters from the Sundstrom range, or in combination with the SR 307 compressed air attachment which then serves as a breathing apparatus with continuous flow for connection to a compressed air supply
Particle filter SR 510 P3 R Sundstrom traps and holds particles in the filtering media. Fits on all Sundstrom filterrespirator products.
  • Specific filter SR 510 P3 R  is reuasable and protect against all types of particles (dust, fume, fog, spray, asbestos), even bacteria, viruses and radioactive pollution
  • Replace the filter after 2-4 weeks or sooner if breathing resistance becomes noticeable
  • Filters are consumables with a limited service life. A filter exposed to strong press or impact or with visible damage must immediately be scrapped
  • Combinations of filters can be used if gases/vapours and particles occur at the same time
  • Used as combined filter in enviroments in which both gases and particles occur such as spray painting, gas and particle firters must be combined
  • Filter installation as per user instructions of the breathing device
  • Note: the particle filter will always be snapped on the gas filter, but the gas filter will not snap onto the particle filter. The gas filter will always be inserted into the respirator
    *Recommended to use also the pre-filter SR 221 which increases the life span of the primary filter.
Gas filter SR 297 ABEK1  Sundstrom is designed to provide resparatory protection against specific contaminants. Fits on all Sundstrom filterrespirator products
  • Specific filter SR 297 ABEK1 Gas Filter protects against organic compounds with a boiling point above 65°C, inorganic and acid gases/vapours & Ammonia
    Tested and approved according to EN 14387:2004
  • A gas filter abrorbs and or adsorbs specific vapours and gases from a contaminated atmosphere. Fits on all Sundstrom filter respirator products. This process continues until the absorbent becomes saturated and allows the contaminant to break through
  • We recommend that the gas filter /combined filter should be changed in accordance with the results of measurements carried our at the worksite. If this is impossible, change the filter every week or earlier if you can smell or taste the pollutants or if your experience any other discomfort. A filter exposed to strong press or impact or with visible damage must immediately be scrapped
  • Combinations of filters can be used if gases/vapours and particles occur at the same time
  • Used as combined filter in enviroments in which both gases and particles occur such as spray painting, gas and particle firters must be combined. Filter installation as per user instructions of the breathing device. Note: the particle filter will always be snapped on the gas filter, but the gas filter will not snap onto the particle filter. The gas filter will always be inserted into the respirator.*tip suggest to use also the pre-filter SR 221 which increases the life span of the primary filter.




Manufacturer: Sundstrom
Weight: 0.7840 kg

ATTRIBUTES