SR 500 Fan Unit with SR 580/SR584 Welding

SR 500 Fan Unit with SR 580/SR584 Welding Sundstrom. Suggested Sundstrom box for Welding, at special price. H06-8410 SR500 CW SR 580/584  box contents: • SR 500 fan
•Lithium Ion Battery STD (Standard 2.2 Ah)
•Equipped with two filters/combined filters
•SR 584/580 Face shield
•Belt
 The SR 500 is a battery-powered fan that, together with a filter and an approved head top, is included in the Sundstrom fan-assisted respiratory protective device systems. Can be used as an alternative to filter respirators in all situations in which these are recommended. This applies particularly to work that is hard, warm or of long duration. Box contents:

• 
  

Features of SR 500 Fan: The SR 500 is a battery-powered fan that, together with a filter and an approved head top, is included in the Sundstrom fan-assisted respiratory protective device systems. Can be used as an alternative to filter respirators in all situations in which these are recommended. This applies particularly to work that is hard, warm or of long duration.The characteristics of the SR 500 are as follows:

• The battery is of lithium-ion type
• Two battery alternatives, i.e. STD (Standard 2.2 Ah) and HD (Heavy Duty 3.6 Ah)
• The charging time for the Standard battery is around 1.5 hours and for the Heavy Duty battery, about 2 hours
• Equipped with two filters/combined filters
• Operating time of up to 13 hours
• The same control is used for starting, stopping and selection of operating status
• Display with symbols
• Equipped with automatic air flow control with compensation for air pressure and temperature
• Electronics ingress protection is approved in IP class IP67 according to IEC / EN 60529

Features of SR 584 Shield / SR580: SR 584 is mounted on the Helmet with visor SR 580 and gives the user not only head and respiratory protection but also protects the eyes and face when welding.With the cartridge in the raised position, the helmet’s large and clear visor acts as face protection for grinding work and similar jobs while preserving respiratory protection at all times.

• Supplied with a passive welding lens with shade number 10 and 90 x 110 mm in size. Three different automatic lenses are available.
• SR 584 is approved together with fan units SR 500 and SR 700 in class TH3 according to EN 12941:1998
• Nominal protection factor: 500

Sundstrom Safety's powered fan units are designed to give the user the maximum level of protection, comfort and cost-effectiveness.